News /

How Do I Hide My LED Strip Power Supply?

2022-06-29 15:05:31 0

How do I hide my LED strip power supply

Before you start, you may be wondering how to hide the power supply of your LED strips. The power supply of your strip is not only visible, but it can also become a fire hazard if it gets wet. It is important to make sure that you hide it as safely as possible and that it fits in the space you have available. Read on to discover some tips for concealing your LED strip power supply.


If you're planning to hide an LED strip power supply, there are several things you should keep in mind. One of the most important is that your LED strip power supply should be run from a stud bay that is accessible but not visible. This outlet can either be in a cabinet or above it. Be sure to locate it in the same stud bay as the existing outlet. Use fish tape to make installation easier.

In order to conceal an LED strip power supply, you must first connect it to the strip's power supply. Using a Y-Connector is a convenient way to do this. The strips have open wires and DC Receptacles, so the connection method depends on what type of connector you're using. Almost all strips feature copper pads with labels ('+' and '-'), which are where electrical inputs must pass.

Solderless connectors

If you are looking for a stylish way to hide your LED strip power supply, then you can choose solderless connectors. These connectors have two sides and clip onto the ends of the strip. These connectors make secure contact with the copper pads on the LED strip. This way, you won't have to worry about soldering or tinkering with the wires. To install the lights, you simply need to release the latch on the connector.

Before you begin installing LED strips, you should first check the wire color. Normally, LED strips use two wires for power. The positive wire is usually red, while the negative is black or white. In some cases, cutting the strips into segments may lead to a wireless copper pad. In such a case, many tutorials suggest soldering the wires onto the copper pad. But this method is messy and requires practice.

Copper layer

Using a copper layer to conceal the power supply can help ensure that your strip lights last a long time. Many LED strip lights are designed with two different PCB layers: one conductive layer and a copper layer. Double-layer PCBs are thicker and heavier and are more durable. They also provide better heat dissipation. You can find LED strips that feature both types of PCB.

Before you install an LED strip, make sure to test it. Check for brightness, color temperature, and controllers before connecting them. Make sure to prep the mounting surface properly. Make sure it's clean and unified. If you cut off the copper layer before mounting your strip, it may not connect properly and could lead to a problem with your LEDs. Using the right adhesive to cover the copper layer will ensure that your strip lights function properly.

Heat dissipation

To maximize the lifespan of your LED strip lights, you need to consider heat dissipation. A good heat sink will carry heat away from the sensitive strip. Consider buying a heat sink made of a suitable material. Alternatively, you can use an LED driver hidden in the strip itself. Either way, your project will be a lot better. But remember to always check the heat dissipation rating before installing it.

The voltage drop in LED strips is more pronounced at the ends, but can be mitigated by running in series. If your strip runs on a continuous reel, it's best to run the strips in series rather than parallel. Moreover, thicker copper cables will minimize voltage losses within the LED strip. A gauge chart is available to help you decide on the right thickness of your cable. Heat dissipation is one of the most important factors in choosing an LED strip.

Protection features

A good way to hide an LED strip light's power supply is to install a flexible profile around it. These profiles come in different sizes and will completely conceal the power supply. The diffused surface will reflect the light, creating a soft glow in the room. This method is also great for hiding the LED strip, as you won't have to worry about damaging it if you walk on it. If you are unsure about how to hide an LED strip, consult an expert.

The LED strip reel has half-circular copper pads on the end. The manufacturer should have provided wires for the LED strips. These wires can be open leads with exposed wires or terminated with a DC receptacle. If the wires are open, you'll need to use the latter method. The other way to hide the power supply is to cut the strips into small segments. Depending on the length, this method can be tricky.

Our LED car lights do not need to consider such a problem, the wires can be hidden according to the wire groove, simple and stylish, and very bright, it is the choice of many people, you deserve it.

Latest article