In the dark, a bright LED Driving Lights for Cars will definitely help the driving of the car. For those who like to do it themselves, adjusting the lights is a good opportunity for them to show off their skills.
Preparations
First, choose a night to park the car by a wall. Keep the front of the car and the wall as vertical as possible and keep a distance of about 10 meters. Turn on the led car light first, and cover one led car light with a thick cloth to adjust the headlights on both sides one by one. Remember, the load inside the car cannot be too heavy or too light, so that the lights can be adjusted more evenly. It is recommended to find a friend to sit in the car, so that not only can the proper load be maintained, but also someone can help.
Detail adjustment
After the led car lights are turned on, record the projection of the lights on the wall with chalk. The left and right lights should be kept at an equal distance from the center axis of the car. If there is an outward or inward deviation, you must use a screwdriver to adjust it according to the instructions in the car manual. As for the height of the headlight beam, the right headlight should be completely horizontal and direct, while the left headlight should be adjusted upward by 10 cm. Be careful not to adjust the headlights too high, as this will dazzle the eyes of the driver on the other side. In addition to the height, the width of the car light can also be adjusted. The right car light beam can be adjusted slightly to the right, so that the road on the right can be seen more clearly in rainy and foggy days with extremely low visibility.
Adjusting the led car lights can of course be done by the workers in the garage, but it only takes a few minutes to do it yourself, and it’s a lot of fun.
