News /

How do you maintain and clean LED underground lights?

2024-06-08 16:13:28 0

  Maintaining and cleaning LED underground lights is essential to ensure their longevity and optimal performance. Here are the steps and tips for proper maintenance and cleaning:



  LED underground lights​ Maintenance Tips



  1.Regular Inspection


  •  Periodically check the lights for any signs of damage or wear, such as cracked lenses or corroded casings.
  •  Inspect the electrical connections and ensure they are secure and free from corrosion.


  2.Check for Moisture


  •  Ensure that the lights are properly sealed to prevent water ingress. Look for any signs of moisture inside the fixture, which can indicate a compromised seal.
  •  If you notice condensation or water inside the fixture, reseal it or replace the gasket to prevent further moisture damage.


  3.Clean the Surrounding Area


  •  Remove any debris, dirt, or leaves around the lights to prevent blockage and ensure proper heat dissipation.
  •  Keeping the surrounding area clean helps maintain the lights' effectiveness and prevents overheating.


 LED underground lights


  LED underground lights Cleaning Steps


  1.Turn Off the Power


  •  Always turn off the power supply before cleaning the lights to avoid electrical hazards.


  2.Remove the Light Fixture


  •  For thorough cleaning, it might be necessary to remove the light fixture from the ground. Refer to the manufacturer’s instructions for proper removal.


  3.Clean the Lens


  •  Use a soft cloth or sponge with mild soap and water to clean the lens. Avoid using abrasive materials or harsh chemicals that can scratch or damage the lens.
  •  For stubborn dirt or grime, a mixture of water and vinegar can be effective. Gently scrub the lens to remove any buildup.


  4.Clean the Casing


  •  Wipe down the outer casing of the light with a damp cloth to remove dirt and dust. Ensure the casing is completely dry before reassembling the fixture.
  •  Check for any signs of corrosion or damage to the casing and address them promptly to prevent further deterioration.


  5.Inspect and Clean Seals and Gaskets


  •  Inspect the rubber seals and gaskets for wear or damage. Clean them with a mild soap solution and ensure they are free from debris.
  •  Replace any damaged seals or gaskets to maintain the waterproof integrity of the fixture.


  6.Reassemble and Test


  •  After cleaning, reassemble the light fixture according to the manufacturer’s instructions.
  •  Restore the power and test the lights to ensure they are functioning correctly.


  7.Additional Tips


  •  Use Appropriate Cleaning Tools: Avoid using high-pressure water jets or abrasive tools that can damage the lights. A gentle approach is best.
  •  Schedule Regular Maintenance: Set a regular maintenance schedule to keep the lights in good condition. This could be seasonally or more frequently depending on environmental conditions.
  •  Protective Measures: Consider using protective covers or shields to reduce the accumulation of dirt and debris on the lights.




  Proper maintenance and cleaning of LED underground lights involve regular inspections, ensuring moisture protection, cleaning the lenses and casings, and checking the seals. By following these steps, you can extend the lifespan of your LED underground lights and ensure they provide optimal illumination for your landscape.

  Regular attention to these aspects will help maintain their efficiency and aesthetics, making your outdoor spaces safer and more attractive.

Latest article