how to choose Off-road vehicle lights?

There are thousands of car lights for off-road vehicles. How to choose a suitable off-road vehicle light is a headache. Next, we will introduce you to the precautions for the installation of led tractor work lights, and then provide you with the corresponding products.

Installation points:

1) Try to avoid using the same with the original car's light line. The light line must be laid separately, and it must be wrapped with a casing and fixed firmly;
2) The light needs to have separate insurance, if possible, pass through the fuse box of the original car, or set up a separate insurance, placed in a reliable and obvious location, the owner must know;
3) A relay must be installed before the switch to realize weak current control and strong current to ensure safety;
4) The switch is independent, try to avoid using it with the original car switch. In addition, if possible, connect the line to the original car's small light controller, so that all auxiliary lights will be powered off when the car lock is closed, so as to eliminate the cause of forgetting to turn off the lights. The hidden danger of battery over-discharge;
5) It is better to use plug connection between the lamp and the light wire, which can facilitate the maintenance and temporary removal of the lamp.

Things that need special attention:

Generally, in the mid-end and high-end products, the off-road vehicle light type is divided into pencil type and flood light type, as shown in the figure above. The former is excellent for its long irradiation distance, and the latter provides a sufficient irradiation width within a sufficient irradiation distance. Personally, it is more appropriate to choose a hybrid light type.

Choose the most suitable and practical led tractor work lights for your beloved off-road vehicle. We provide several simple and convenient options for everyone to choose.

The first

The second

The third

The fourth